AirLive SNMP-FSH2602MG - Manual (Page 102)

AirLive SNMP-FSH2602MG User’s Manual
90
PortState: Display spanning tree status about the switch for per port is forwarding or
blocking.
Select .
PathCost: Specifies the path cost of the port that switch uses to determine which port
are the forwarding ports.
Priority: This means priority port, you can make it more or less likely to become the root
port.
Press Ctrl +A back to action menu line.
Select to save all configure value.
On the action menu line you can press to configure port9 ~ port26, press
return to last page.
NOTE: All about the parameter description please see the sections Web
configuration’s explanation of Spanning Tree.
SNMP
Any Network Management running the simple Network Management Protocol (SNMP) can
be management the switch.
Use this page to define management stations as trap managers and to enter SNMP
community strings. User can also define a name, location, and contact person for the
switch.
System Options
Press .
System Name: Type a name to be used for the switch.
System Contact: Type the name of contact person or organization.
System Location: Type the location of the switch.
Press Ctrl+A go back action menu line.
Press to save the configure value.