AirLive SNMP-FSH2602MG - Manual (Page 39)

AirLive SNMP-FSH2602MG User’s Manual
27
802.1p Priority
First Come First Service:
The sequence of packets sent is depending on arrive
orders.
All High before Low:
The high priority packets sent before low priority packets.
WRR:
Weighted Round Robin. Select the preference given to packets in the switch's
high-priority queue. These options represent the number of high priority packets sent
before one low priority packet is sent. For example, 5 High：2 Low means that the
switch sends 5 high-priority packets before sending 2 low- priority packets.
Enable Delay Bound:
Limit the low priority packets queuing time in switch. Default
Max Delay Time is 255ms. If the low priority packet stays in switch exceed Max Delay
Time, it will be sent. The valid range is 1-255ms.
QoS policy: High Priority Levels
0~7 priority level can map to high or low queue.
Collisions Retry Forever
Disable – In half duplex, collision-retry maximum is 48 times and packet will be
dropped if collision still happen.
Enable
– In half duplex, if happen collision will retry forever.
802.1x Protocol
Enable or disable 802.1x protocol.