AirLive SNMP-FSH2602MG - Manual (Page 77)

AirLive SNMP-FSH2602MG User’s Manual
65
Trunk Configuration
This page can create max seven trunk groups. User can arbitrarily select up to four ports
from port 1~port 26 to build a trunking group.
Actions->
Select on actions menu
Press space key to configure the member port of trunk group. Besides, you have to set
“Static” or “LACP” for the corresponding trunk group of TRK1~TRK7 item.
“Static” – the normal trunk.
“LACP” – this trunk group have link aggregation control protocol.
Press Ctrl+A to go back action menu line
Select to save all configure value.
If the item of TRK1~TRK7 is set “Disable”, it’s mean the trunk group is deleted.
All ports in the same static trunk group will be treated as single port. So when you
setting VLAN members and Port configuration they will be toggled on or off
simultaneously.
NOTE: If VLAN group exist, all of the members of static trunk group must be in same VLAN
group.