Port status, All port status – AirLive SNMP-FSH2602MG User Manual
Page 31
AirLive SNMP-FSH2602MG User’s Manual
19
Port Status
All Port Status
Click on “Port Status” of the left menu bar will bring up the general status for all the ports
and modules.
Figure 4-3 All Port Status
State:
Display port statuses: disable or enable. “Unlink” will be treated as “off ”.
Link Status:
Down means “No Link”, UP means “Link”.
Auto Negotiation:
Display the auto negotiation mode: auto/force/nway-force.
Speed status:
Display 1000Mbps or 100Mbps or 10Mbps speed
Duplex status:
Display full-duplex or half-duplex mode.
Flow Control:
Full: Display the flow control is enabled or disabled in full mode.
Half: Display the backpressure is enabled or disabled in half mode.
Rate Control:
Display the rate control setting.
Ingr: Display the port effective ingress rate of user setting.
Egr: Display the port effective egress rate of user setting.
Port Security:
Display the port security is enabled or disabled.
Config:
Display the state of user setting.