AirLive SNMP-FSH2602MG - Manual (Page 43)

AirLive SNMP-FSH2602MG User’s Manual
31
How to Setup
Step 1:
Under the web configuration, choose Administrator->Port Control
S
t
e
p
2
:
P
l
e
a
s
e
s
e
l
ect the port where you want to control the rate
Step 3
: Under the field “Rate Control”, enter values in the Ingr(ingress) and Egr(egress)
field accordingly:
Ingress: Type the port effective ingress rate. The valid range is 0 ~ 1000. The unit is
100K.
0: disable rate control.
1 ~ 1000: valid rate value
Egress: Type the port effective egress rate. The valid range is 0~1000. The unit is
100K.
0: disable rate control.
1 ~ 1000: valid rate value.
Trunking
(Administrator menu)
The Link Aggregation Control Protocol (LACP) provides a standardized means for
exchanging information between Partner Systems on a link to allow their Link Aggregation
Control instances to:
1.
Reaching agreement on the identity of the Link Aggregation Group to which the link
belongs
2. Move the link to that Link Aggregation Group
3. Enable its transmission and reception functions in an orderly manner.
In conclusion, Link aggregation lets you group up to eight consecutive ports into a single
dedicated connection. This feature can expand bandwidth to a device on the network.
LACP operation requires full-duplex mode,
more detail information refers to IEEE
802.3ad