AirLive SNMP-FSH2602MG - Manual (Page 40)

AirLive SNMP-FSH2602MG User’s Manual
28
Console Port Information
(Administrator menu)
Console is a standard UART interface to communicate with Serial Port.
User can use windows HyperTerminal program to link the switch. Connect To -> Configure:
Bits per seconds: 57600
Data bits: 8
Parity: none
Stop Bits: 1
Flow control: none
Port Controls
(Administrator menu)
User may modify or change mode operation in this page. Please select a port under the
“Port” field and modify the port configuration in the subsequent field.
Figure 4-11 Port Control Settings