Create 802.1q vlan – AirLive SNMP-FSH2602MG User Manual

Page 80

AirLive SNMP-FSH2602MG User’s Manual

NOTE: If the trunk groups exist, you can see it (ex: TRK1, TRK2…) after port26, and
you can configure it is the member of the VLAN or not.

Create 802.1Q VLAN

Create an 802.1Q VLAN and add tagged /untagged member ports to it.

Select .

VLAN Name: Type a name for the new VLAN.

VLAN ID: Type a VID (between 1~4094). The default is 1. There are 256 VLAN groups
to provided configure.

Protocol VLAN: Press Space key to choose protocols type.

Member: Press Space key to choose VLAN member. There are three types to
selected:

UnTagged：This port is the member port of this VLAN group and outgoing frames are
NO VLAN-Tagged frames.

Tagged：This port is the member port of this VLAN group and outgoing frames are
VLAN-Tagged frames.

NO：The port is NOT member of this VLAN group.

Press Ctrl+A go back action menu line.

Select to save all configure value.