AirLive SNMP-FSH2602MG - Manual (Page 55)

AirLive SNMP-FSH2602MG User’s Manual
43
The spanning tree status about the switch is shown in the following screen.
Setting Spanning Tree
Figure 4-19 Set Spanning Tree
Please change the Parameter according to the parameter table description below
:
Parameter Description
Priority You can change priority value, A value used to identify the root bridge.
The bridge with lowest value has the highest priority and is selected as
the root. Enter a number 1 through 65535.
Max Age You can change Max Age value, The number of second bridge waits
without receiving Spanning-Tree Protocol configuration messages
before attempting a reconfiguration. Enter a number 6 through 40.
Hello Time
You can change Hello time value, the number of seconds among the
transmission of Spanning-Tree Protocol configuration messages. Enter