AiM MyChron3 XG Log - Manual (Page 6)

The Display
Low battery
warning
Speed measure
unit
Channels #2 and
#4
Temperature
measure unit
Lap (split) time
Channels #1 and
#3
Night Vision
Configurable
display: RPM,
speed, battery
voltage
The wide display with backlight shows RPM (graphical bar), temperature and
pressure analog inputs, test and lap number and, when the vehicle passes in front
of the beacon, it shows the Lap Time (or Split Time). It is also possible to
configure a second display page (using button VIEW) in order to see the RPM
digital value (as shown in the previous drawing), the vehicle speed (in km/h or
Mph) or the best lap time. When you are not running it is also possible to see the
battery voltage.
The display also shows some small icons, showing the configured Temperature
unit of measure (Celsius [°C] or Fahrenheit [°F]), the Speed unit of measure (km/h
or Mph), the current displayed measure (P1 → P4 for pressures, T1 → T2 for
temperatures, 1 → 4 for custom sensors) the backlight option and the Low Battery
Warning, that appears when the battery voltage is low.
6