AiM MyChron3 XG Log - Manual (Page 56)

Configuration via software
For a correct, complete and fast MyChron 3 Plus/Gold/Gold XG
configuration, it is absolutely necessary to use a PC and the software Race
Studio 2.
The “via software configuration” allows the user to set some parameters that
cannot be set using the keyboard. For instance, the temperature sensors
(thermocouples, thermoresistances, VDO sensors) or the pressure ones, cannot
be set via keyboard and so, if you wish to measure temperature or pressure, you
have to configure your MyChron 3 Plus/Gold/Gold XG using Race Studio 2.
Moreover, if you bought a MyChron 3 Gold/Gold XG and you wish to measure
the lateral g-force (or the gyroscope input), in order to create a track map, you
have to autocalibrate the gauge via software.
Before starting the via software configuration, it is reminded to install Race
Studio 2 and the USB drivers, as mentioned in the previous chapter. It is
also reminded that, before configuring the instrument, you have to connect
it to a PC and to switch it on.
Once launched the program, by double-clicking on the Race Studio 2 icon on
your PC’s desktop or by selecting the Race Studio 2 shortcut in your PC’s Start
toolbar, it will appear the software’s main window, reported here above:
56