AiM MyChron3 XG Log - Manual (Page 37)

Then push MEM/OK to enter EDIT MODE and use MENU/<<
or >> to change language.
Press button MEM/OK to save the changes or button VIEW to
discard the changes.
Firmware
version
This function shows three numbers, which represent,
respectively, the firmware version, the firmware upgrade date
and the gauge’s serial number.
To run this function, after having entered the
CONFIGURATION MODE, push MENU/<< until you see
FIRMWARE version
The firmware management window is organized on two
different rows: in the upper one it is shown the firmware
version, on the left, and the firmware upgrade date, on the
right (dd/mm/yy). In the lower row, instead, it is shown the
gauge’s serial number.
Utility functions
Once configured your system, you are ready to manage the data acquired with
your gauge. MyChron 3 Plus/Gold/Gold XG records RPM, 4 analog inputs
(pressures or temperatures for Plus version, pressures, temperatures,
potentiometers, Lambda sond for the Gold/Gold XG ones), speed, gear number,
lateral g-force (Gold CAR and Gold XG versions) or Gyroscope (Gold BIKE
versions) at a maximum sampling rate of 200 Hertz (200 times per second) per
channel. These data can be retrieved at a later stage for analysis.
37