5 defining measurements, 1 plate size – pattern, Defining measurements 5.1 – Eppendorf AF2200 Plate Reader User Manual

Page 41: Plate size – pattern, 5defining measurements

Defining measurements

Eppendorf

PlateReader AF2200

English (EN)

Defining measurements

The following chapter describes some examples to illustrate the definition of different measurements.

5.1

Plate Size – Pattern

1. Use the

Plate

program element in the workflow pane to choose a plate format.

2. Select the desired plate format from the Plate definition drop-down list (e.g. Eppendorf 96 Flat Clear

UV-VIS)

3. To measure a particular well or a range of wells on the plate click the link

Pattern

4. In the

Pattern

program element click the desired well or drag a frame over the range of desired wells

(e.g. A1 to E6). The selected wells are displayed in blue; unselected appear in grey.

Wells can be selected by dragging a frame over the plate. Further ranges can be selected by holding
down the Ctrl key on the keyboard and dragging another frame around the wells to be selected.

5. By clicking on

Zoom

the plate is zoomed in; well selection can be done also in the zoomed window.