Eppendorf TransferMan4 m - Manual (Page 76)

Operation
TransferMan
® 4m
English (EN)
76
6.20 Service function
6.20.1 Service menu and parameters
Abb. 6-10:Service
Fig. 6-10: Service
6.20.2 Execute the Selftest function
1. Select Selftest and confirm with Enter .
2. Confirm Execute with Enter .
The screen for the Selftest function appears.
3. Execute Selftest with Start .
The motors move up to the limit stops.
4. Terminate Selftest with Stop .
Parameter Value Range of values
Selftest Move the motor module in all three axes and output
error message Execute
Device info Display software version Execute
Set clock Set date and time YYYY-MM-DD
00:00
Movements Show movement routes of the modules (X, Y, Z) Execute
Show errors Display last 10 error messages Execute
Demo run Save the position and move to it Execute
CAUTION! Risk of crushing between the modules
The modules automatically move in all spatial axes.

Do not reach into the movement range of the modules.