beautypg.com

4 mounting the angle head, Mounting the angle head, Inserting the capillary holder into the angle head – Eppendorf TransferMan4 m User Manual

Page 30

background image

Installation
TransferMan

®

4m

English (EN)

30

4.4.4

Mounting the angle head

Prerequisites

• 3 mm Allen torque key

4.5

Inserting the capillary holder into the angle head

Prerequisites

• A universal capillary holder from Eppendorf is available.

• A capillary holder (4 mm diameter) from a different manufacturer is available.

2. Push the swivel joint with the X-module

onto the Y-module and tighten.

1. Push the angle head onto the X-module.

2. Slightly tighten the angle head.

See also other documents in the category Eppendorf Equipment: