Eppendorf TransferMan4 m - Manual (Page 60)

Operation
TransferMan
® 4m
English (EN)
60
6.9.1 Defining the lower limit
Prerequisites
• An application has been selected.
1. Position the capillary a little way above the slide.
2. Press Z-axis Limit .
• The Z-coordinate is marked with L .
• The value for the limit ( Limit Z ) is displayed.
• Z-axis Limit is selected.
• The capillary cannot be moved any lower.
6.9.2 Deleting the lower limit
1. Press Z-axis Limit .
• The limit is deleted.
6.9.3 Defining the upper limit
1. In the Installation menu, select the Upper limit submenu.
The Upper Limit window appears.
2. Move the capillary to the top position.
3. Save the position with Set .
• The Z-coordinate is marked with U .
Upper Limit
Menu / Installation / Upper Limit
Back Set Clear
X
Y
Z
Lim
=
=
=
0
0
2671
2671
µm
µm
µm U
µm