Eppendorf TransferMan4 m - Manual (Page 65)

Operation
TransferMan ® 4m
English (EN)
65
6.13.2 Setting the parameter for Home
1. Set the speed.
2. Set the offset.
3. Close the menu.
6.13.3 Move the capillary out with the home key
Prerequisites
• The parameters in the Home menu have been defined.
6.13.4 Move the capillary back with the home key
1. Press the home key.
• The capillary is moved back into the work area.
• The home function is terminated.
CAUTION! Risk of crushing between the modules
The modules automatically move in all spatial axes.

Do not reach into the movement range of the modules.
1. Press the home key.
The home key flashes.
• The capillary is moved out of the work
area.
• The home key lights up.
CAUTION! Risk of crushing between the modules
The modules automatically move in all spatial axes.

Do not reach into the movement range of the modules.