Eppendorf TransferMan4 m - Manual (Page 17)

Product description
TransferMan ® 4m
English (EN)
17
2.5.4 Direction of movement of the rotating wheel
The rotating wheel on the joystick moves the motor module in the vertical axis. This
activates the motor of the Z-module.
2.5.5 Joystick key functions
2.6 Working range
There are three working ranges within the movement range of the joystick. For each
working range, a radius with a resulting speed ratio is preset. The radius can be set using
the selection dial on the control board and in the
Speed menu.
Working ranges:
• coarse – for a large working range
• fine – for a medium working range
• x-fine – for a small working range
Abb. 2-9:Movement in the Z-axis
Fig. 2-9: Movement in the Z-axis

Move the capillary in the vertical
direction (Z-axis).
Abb. 2-10:No movement of the capillary
Fig. 2-10: No movement of the capillary

Uncouple the joystick from the motor
module.

Trigger functions (e.g., switch between
saved positions).