beautypg.com

3 aligning the width, 4 aligning the angle head, 9 entering mounting parameters – Eppendorf TransferMan4 m User Manual

Page 34: 1 microscope and adapter, Aligning the width, Aligning the angle head, Entering mounting parameters 4.9.1, Microscope and adapter

background image

Installation
TransferMan

®

4m

English (EN)

34

4.8.3

Aligning the width

4.8.4

Aligning the angle head

4.9

Entering mounting parameters

To facilitate remounting the mounting parameters can be recorded.

1. Enter the mounting parameters in the tables.

4.9.1

Microscope and adapter

1. Undo the screw on the Z-module holder.

2. Align the Z-module on the scale of the

microscope adapter and tighten the
screw.

1. Undo the screw on the angle head.

2. Align the angle head on the scale of the

X-module.

Name

Type

Microscope

Adapter

Attachment side of the
motor module

See also other documents in the category Eppendorf Equipment: