Eppendorf TransferMan4 m - Manual (Page 11)

Product description
TransferMan ® 4m
English (EN)
11
2.3.1 Motor module
The motor module is made up of three modules. The capillary can be moved in all three
spatial axes due to the layout of the modules. The X-module with the capillary can be
swung out of the work area using the swivel joint. The injection angle of the capillary can
be set to any angle on the angle head.
Abb. 2-2:Motor module
Fig. 2-2: Motor module
1 Z-module
2 YZ-connector
3 Angle head
4 Y-module
5 Swivel joint
6 X-module
1
2
3
4
5
6