Eppendorf TransferMan4 m - Manual (Page 59)

Operation
TransferMan ® 4m
English (EN)
59
6.8.3 Move to the position using the joystick button
Prerequisites
• At least one position is stored.
• The Joystick key parameter must be set to the Switch position value.
6.8.4 Deleting a stored position
Prerequisites
• A position is stored.
1. When the position has been reached, hold the softkey.
• An acoustic signal will sound.
• The position has been cleared.
• The status field is empty
6.8.5 Overwriting a stored position
Prerequisites
• A position is stored.
1. Press the softkey for a different position.
It will move to the position.
2. When the position has been reached, press and hold the softkey for the position to be
overwritten.
• The old position is overwritten with the current coordinates.
3. Press the softkey.
• An acoustic signal will sound.
• In the softkey status field a filled circle is displayed.
• The stored position is displayed in the coordinate field.
6.9 Vertical limits
For the Z-axis, a lower and upper limit can be defined. This prevents the capillary coming
into contact with the bottom of the Petri dish or moving against the condenser of the
microscope adapter.
• Lower limit – Z-axis Limit
• Upper limit – Upper limit

Press the joystick key twice.
It will move to the first position

Press the joystick key twice.
It will move to the next position