Eppendorf TransferMan4 m - Manual (Page 48)

Software
TransferMan
® 4m
English (EN)
48
Application selection
• Select the application
• Store the main application
5.2.1 Application parameters
Predefined softkeys of the different applications.
• Pos 1 – Save the X, Y and Z values of the capillary position. Switch the position using
the joystick key.
• Pos 2 – Save the X, Y and Z values of the capillary position. Switch the position using
the joystick key.
• Pos 3 – Save the X, Y and Z values of the capillary position. Switch the position using
the joystick key.
• Y off – Switch off the movement of the capillary in the Y-axis. Prevents moving
sideways during injection.
• Z-axis Limit – Set the lower limit for vertical capillary movement.
• Axial – Switch on the capillary movement along the mounting bracket.
5.2.2 Application – Cell transfer
This application is suitable for, e.g., stem cell transfer, polar body biopsy and similar
applications.
Abb. 5-5:Application 1 Cell transfer
Fig. 5-5: Application 1 Cell transfer
Parameter selection
• Double-click on joystick key – switch position
• Save positions 1, 2 and 3
• Freely program softkey
• Set lower limit ( Z-axis Limit )