Eppendorf TransferMan4 m - Manual (Page 75)

Operation
TransferMan ® 4m
English (EN)
75
6.19 Change appl. function
With this function you can define each application as the start screen or reactivate the
default screen.
6.19.1 Change appl. menu and parameters
Abb. 6-9:Menu – Change appl.
Fig. 6-9: Menu – Change appl.
6.19.2 Defining the selected application as the start screen
1. Select Start display .
2. Confirm with Execute .
3. Close the menu.
• The micromanipulator starts with the selected application.
6.19.3 Defining the application as the start screen
1. Select the application.
2. Confirm with Enter .
3. Close the menu.
• The micromanipulator always starts with the defined application.
Parameter Value Range of values
Start display Reactivate start screen to select an application Execute
Application Define the selected application as the start screen Cell transfer
ICSI
DNA injection
Basic
My application