3 executing center motors, 4 executing user default, 18 softkeys function – Eppendorf TransferMan4 m User Manual
Page 72: 1 softkeys menu and parameters, Executing center motors, Executing user default, Softkeys function 6.18.1, Softkeys menu and parameters
Operation
TransferMan
®
4m
English (EN)
72
6.17.3
Executing
Center motors
Prerequisites
• No capillary holder is clamped.
1. Select the parameters and confirm with
Enter
.
2. Confirm
Execute
with
Enter
.
• X-motor and Y-motor are moved to the middle position.
• Z-motor is moved to a 20/80 position.
• All coordinates are reset to zero.
• Saved positions are deleted.
• Set limits are deleted.
6.17.4
Executing
User default
1. Select the parameters and confirm with
Enter
.
2. Confirm
Execute
with
Enter
.
• All parameters are reset to the factory settings.
• The application screen appears.
6.18
Softkeys
function
With this function you can assign programs to free softkeys. Assigned softkeys are
indicated with a lock symbol.
6.18.1
Softkeys
menu and parameters
Abb. 6-8:Menu – Softkeys
Fig. 6-8:
Menu –
Softkeys
CAUTION! Risk of crushing between the modules
The modules automatically move in all spatial axes.
Do not reach into the movement range of the modules.