Eppendorf Mastercycler nexus - Manual (Page 95)

Transport, storage and disposal
Mastercycler ® nexus
English (EN)
95
12 Transport, storage and disposal
12.1 Packing
Use the supplied packing material when packing the device for transport or storage. If you do not have this
anymore or if it is damaged, contact your Eppendorf office.
Prepare the device as follows prior to packing:
1. Pay attention to the decontamination notes (see Decontamination before shipment on p. 92).
2. Let the device sit for 30 minutes and make sure there is no condensate in the thermoblock.
3. Load the thermoblock with an empty PCR plate.
4. Close the heated lid.
CAUTION! Risk of injury due to lifting and carrying heavy loads
The device is heavy. Lifting and carrying the device can lead to back injuries.
 Transport and lift the device with an adequate number of helpers only.
 Use a transport aid to transport the device.
NOTICE! Damage as a result of incorrect packing.
Eppendorf AG is not liable for damage caused by improper packing.
 The device may only be stored and transported in its original packaging.
WARNING! Damage to health due to contaminated device and accessories.
 Decontaminate the device and the accessories before storage and shipping.