Eppendorf Mastercycler nexus - Manual (Page 59)

PCR run
Mastercycler ® nexus
English (EN)
59
7 PCR run
7.1 Loading the thermoblock
7.1.1 Selecting the sample tubes
7.1.1.1 Approved sample tubes for devices with a 96-well thermoblock
The thermoblock can be loaded with the following sample tubes:
• 0.1 mL PCR tubes
• 0.2 mL PCR tubes
• 0.5 mL PCR tubes (only for aluminum thermoblock)
• PCR tube strips (0.1 mL or 0.2 mL)
• 96-well PCR plates
• segments of separable 96-well PCR plates
7.1.1.2 Approved sample tubes for devices with a 64+32-well thermoblock
The thermoblock can be loaded with the following sample tubes:
• 0.1 mL PCR tubes
• 0.2 mL PCR tubes
• 0.5 mL PCR tubes
• PCR tube strips (0.1 mL or 0.2 mL)
• 64 and 32-well PCR plates
• segments of separable 96-well PCR plates
7.1.1.3 Approved sample tubes for devices with a flat thermoblock
Up to 4 slides
WARNING! Biohazard due to unsuitable reaction vessels, plates and lids.
Unsuitable reaction vessels, plates and lids will become damaged in the cycler, This will
release sample material.
 Only reaction vessels, plates and lids that meet the requirements described in the
operating manual may be used.