Snorkel SR2770 - Manual (Page 54)

■ Extending The Multi-Position Platform
Figure 8.32
The MULTI-po si tion ex tend ible plat form  (see
Fig ure 8.32) can be se curely locked into seven dif -
fer ent po si tions. To move it from one po si tion to the
other do the fol low ing:
1. Stand on the non-extendible part of the
platform and face the front of the machine.
The distribution of the RATED WORK LOAD
changes when the extendible platform is
extended. Read the decal on the toe board at
the front of the platform or at the entrance to
the platform for safe weight distribution.
Figure 8.33
2. Lift up the deck extension handles  to
unlock the deck (see Figure 8.33).
Figure 8.34
3. Push or pull the deck extension handles 
to move the platform to the desired position
(see Figure 8.34).
Figure 8.35
4. Lower the deck extension handles ‚ and
allow the lock ƒ to locate (see Figure 8.35).
SR2770 – 11669A page 8 - 11
8. Operation
WARNING