Snorkel SR2770 - Manual (Page 21)

3. Specifications
The SR2770 se ries ma chines are scis sor-supported el e vat ing work plat forms built to con form to the fol -
low ing stan dards.
OSHA Para graph 1910.67 Ti tle 29, C.F.R., Ve hi cle-Mounted El e vating and Ro tating Work Plat forms - La -
bour.
OSHA Para graph 1926.556 Ti tle 29, C.F.R., Ae rial Lifts - Con struc tion.
Aus tra lian Stan dard AS1418-10 1996 El e vating Work Plat forms.
prEN280 and MACHINERY DIRECTIVE 98/37/CEE
NOTE:
For further details regarding lubricants, maintenance schedules and service please refer to the
Maintenance and Repair Parts Manual for this machine.
■ General Specifications, Standard Machines
SPECIFICATIONS SR2770
Nominal working height 10.28m 33’ 9”
Maximum height to basket floor 8.28m 27’ 2”
Maximum outreach 1200mm with roll out deck
Speed (when raised) 0 to 1kph 0 to 0.64mph
Speed (maximum drive) 0 to 4.5kph 0 to 2.8mph
Maximum width of base 1.77m 5’ 9”
Safe working load - Main deck
(Roll out deck not extended) 580kg 1280lbs
Safe working load - Main deck
Roll out deck extended - R/O deck 460kg
120kg 1015lbs
265lbs
Standard colour White platform. Orange scissors and base
Platform size - [Four foot (1.2m)
platform extension retracted] 2.73 x 1.65m 8’ 11” x 5’ 5”
Collapsed height 1.7m 5’ 8”
Overall length (with stabilizers) 3.36m 11’ 0”
Gradeability 35%
Lift time 26 seconds
Lower time 35 seconds
Turning radius (inner) 2.83m 9’ 3”
Turning radius (outer) 4.6m 15’ 1”
Insulation rating Nil
Overall weight 2800kg 6272lbs
Ground clearance 370mm 14.6”
■ Recommended Hy drau lic Oil
Shell Tellus 32 or Castrol AWS 32 or sim i lar.
SR2770 – 11669A page 3 - 1