Apple Xsan 1.4 - Manual (Page 166)

166 Appendix B Using the Command Line
cvadmin Commands
cvadmin command Description
activate
[volume|index]
Choose the “active” volume that you want to work with
interactively.
volume – the name of the volume
index – the numeric ID of the volume (to see a list of these, use
the cvadmin select command without any parameters)
disable pool
[read|write]
Prevent read or write access to a storage pool.
pool – the name of a storage pool in the currently active
volume.
disks [refresh] List LUNs.
down pool Disallow all access to a storage pool.
enable pool
[read|write]
Allow read or write access to a storage pool.
fail (volume|index) Cause a volume to fail over to a standby controller.
volume – the name of the volume
index – the numeric ID of the volume (to see a list of these, use
the cvadmin select command without any parameters)
filelocks [yes|no] Enable or disable file and record locks. Use the command
without any parameter to see the current setting for locks.
multipath pool
(rotate|static)
Specify how Xsan uses multiple paths to a storage pool.
paths List available LUNs.
quit Exit from cvadmin.