Class1 ES-Key-USM - Manual (Page 22)

22
Pressing [ESC] will display the Select Network I/O, Modules or Vocation Select Menu.
Locating all the modules in the system can let you know if there are any communications
problems and where they might be located.
SCROLL ESC
MOD:POWER ADDR:00
STATUS: LOCATED
v1.01 PDM 8-Relay
Msg/sec:Tx=XX Rx=XX
SCROLL ESC
MOD:INPUT ADDR:00
STATUS: NOT LOCATED
SCROLL ESC
MOD:DISPLAY ADDR:00
STATUS: LOCATED
v1.03 Display 1
Msg/sec:Tx=XX Rx=XX
SCROLL ESC
=
MOD:VOCATION/INTLK
STATUS: LOCATED
v1.01 PTO/Drive Gear
Developer’s Module
SCROLL ESC
=
MOD:DATA LOGGER
STATUS: LOCATED
v1.01 Data Logger
Developer’s Module
The display will indicate the Device Type, it’s
address, communications status, software
version, module type and the number of mes-
sages per second sent and received.
Scroll through all the modules in the data-
base to verify that they are on-line.
NOTE
1: T
HE CONTROL MODULE WILL ONLY LOOK FOR DEVICES THAT ARE CONTAINED IN THE ACTIVE DATABASE
.
A
NY MODULE WITH A
STATUS: NOT LOCATED
SHOULD BE INVESTIGATED
.
I
F AN
UNKNOWN M
ODULE APPEARS
,
THE DATABASE IS MORE THAN LIKELY CORRUPT
.
The [NET] menu opens a selection window
for information on the network modules, in-
puts, outputs or the vocation module.
Pressing [MOD] allows individual modules
to be queried and module information to be
displayed.
SCROLL ESC
Module Menu
Select Network I/O,
Modules, or Vocation
[ MOD ] [I/O] [VOC]
SCROLL ESC
fåÑçêã~нбзе= зе= Е~кЗI fåÑçêã~нбзе= зе= Е~кЗI fåÑçêã~нбзе= зе= Е~кЗI fåÑçêã~нбзе= зе= Е~кЗI fåÑçêã~нбзе= зе= Е~кЗI
еЙнпзкв=зк=лулнЙг\ еЙнпзкв=зк=лулнЙг\ еЙнпзкв=зк=лулнЙг\ еЙнпзкв=зк=лулнЙг\ еЙнпзкв=зк=лулнЙг\
=x =x =x =x =x kbq kbq kbq kbq kbq z==xpvpz==x`^oaz z==xpvpz==x`^oaz z==xpvpz==x`^oaz z==xpvpz==x`^oaz z==xpvpz==x`^oaz
Information on card,
network or system?
[ NET ] [SYS] [CARD]