Motor control, Power modules – Class1 ES-Key-USM User Manual
Page 11
11
Solid State Modules use an integrated circuit driver to supply current to its loads. Outputs are
common bussed to system power and can deliver up to 7.5 Amps. Current levels above two
(2) amps can be used to indicate whether an output is ON or OFF. These modules use a Hex
switch for addressing and come in three (3) styles.
104434 Eight (8) output
PDM-8
104528 Six output Two input
PDM-(6/2)
104529 Four output Four input
PDM-(4/4)
Solid State Modules with inputs have polarity selectable inputs.
Any output can be made to flash, the first four inputs flash at one instance and the second
four flash at the opposite instance (anti-flash).
The flash rate can be configured to 75 FPM or 150 FPM.
Connector Information
DTM06-12SA Lock WM-12S
Deutsch 20 Ga Sockets
1062-20-0122 for 16-10 Ga wire
0462-201-20141 for 18-24 Ga wire
0462-201-2031 Gold Contacts 18-24 Ga wire
PWR
BUS
COM
7 8 9 10 11 12
6 5 4 3 2 1
Power Modules
Eight Output
Six OUT/Two IN
Four OUT/Four IN
1
Output 0
1
Output 0
1
Output 0
2
CAN HI
2
CAN HI
2
CAN HI
3
CAN Shield
3
CAN Shield
3
CAN Shield
4
Output 2
4
Output 2
4
Output 2
5
Output 4
5
Output 4
5
Input 3
6
Output 6
6
Input 1
6
Input 1
7
Output 7
7
Input 0
7
Input 0
8
Output 5
8
Output 5
8
Input 2
9
Output 3
9
Output 3
9
Output 3
10
Output 1
10
Output 1
10
Output 1
11
CAN LO
11
CAN LO
11
CAN LO
12
Ground
12
Ground
12
Ground
Power Stud 10-32 thread/#10 Ring