Class1 ES-Key-USM - Manual (Page 24)

24
SCROLL ESC
THROTTLE INPUT 000%
OUTPUT:0.0V PWM:00%
FIDLE:00% REMOTE:00%
[
HSET ] [IDLE] [EXIT]
SCROLL ESC
CHANGE HIGH IDLE
SET-POINT TO 00% ?
[YES] [NO]
THROTTLE INPUT: displays the panel
throttle position. OUTPUT: displays the ana-
log engine control signal voltage. PWM: in-
dicates the PWM engine control signal.
FIDLE: displays the percentage of full throttle
that a high idle signal will command. RE-
MOTE: is the Throttle percentage com-
manded by the UP and DOWN switches.
The [SYS] menu opens a selection window
for information on Load Management, En-
gine or the database file.
Pressing [ENG] brings up the Engine Fast
Idle and Throttle Menu. This menu is used
in conjunction with a Vocation Module. The
engine will be controlled if the proper inter-
locks are present.
SCROLL ESC
ENG Menu
Information on load man-
agement, Engine, or data-
base file?
[ ENG ] [MNGT] [FILE]
SCROLL ESC
fåÑçêã~нбзе= зе= Е~кЗI fåÑçêã~нбзе= зе= Е~кЗI fåÑçêã~нбзе= зе= Е~кЗI fåÑçêã~нбзе= зе= Е~кЗI fåÑçêã~нбзе= зе= Е~кЗI
еЙнпзкв=зк=лулнЙг\ еЙнпзкв=зк=лулнЙг\ еЙнпзкв=зк=лулнЙг\ еЙнпзкв=зк=лулнЙг\ еЙнпзкв=зк=лулнЙг\
=x =x =x =x =x kbq kbq kbq kbq kbq z==xpvpz==x`^oaz z==xpvpz==x`^oaz z==xpvpz==x`^oaz z==xpvpz==x`^oaz z==xpvpz==x`^oaz
Information on card,
network or system?
[NET] [ SYS ]
[CARD]
With the proper interlocks, the engine can
be operated to a desired RPM. Once this
is accomplished, pressing
[ HSET ]
brings
up the menu to set the current RPM as
the HIGH IDLE RPM.
SCROLL ESC
THROTTLE INPUT 000%
OUTPUT:0.0V PWM:00%
FIDLE:00% REMOTE:00%
[
HSET ] [IDLE] [EXIT]
Pressing YES or NO returns you to the
Engine Menu. IDLE brings the engine to
curb idle and EXIT returns you to the Sys-
tem Select Menu.
SCROLL ESC
Information on load man-
agement, Engine, or data-
base file?
[ENG] [ MNGT ] [FILE]
Pressing Management [MNGT] brings you to the Load Management Display Screen.