Class1 ES-Key-USM - Manual (Page 16)

16
USM 103383
USM Control Module (PN 103383)
The USM Control Module is the primary module in the system. It has an ES-K ES-K ES-K ES-K ES-Keeeeey y y y y TM TM TM TM TM C C C C Car ar ar ar ard d d d d reader
to transfer information to and from the microprocessor memory as well as the capability to
interface with a computer on the CAN bus. Direct access can be made through five switches
and a twenty character by four line display on the USM. These are used to access the menu
driven information, programming and diagnostic features. All logic and control for the system
is handled by the USM Control Module. The menu is the user interface to the system allowing
one to view information about the system, diagnose it and program load management func-
tions.
Press the red switch directly under [MENU] to enter the ES-K ES-K ES-K ES-K ES-Keeeeey y y y y TM TM TM TM TM Sy Sy Sy Sy Syst st st st stem em em em em menu.
In this section, a pressed switch is indicated by a black dot on the switch.
SCROLL ESC
In normal operation, the center switch is active with [menu] being displayed just above it.
The escape [ESC] switch is always active when in the menu system and will move up one
level each time that it is pressed until the top level is reached.
The [SCROLL] switches are active in certain menus to locate input or output data from a list.
The three switches just below the display window are used to control the menu system. They
become active and their function identified by text immediately above the switch. No text
above a switch indicates that it has no function in that menu.
Class1, Inc.
ES-K ES-K ES-K ES-K ES-Keeeeey y y y y TM TM TM TM TM Sy Sy Sy Sy Syst st st st stem em em em em
V V V V Version 2.02d ersion 2.02d ersion 2.02d ersion 2.02d ersion 2.02d
[ MENU ]