Brother MFC 4300 - Manual (Page 81)

R E M O T E F A X O P T I O N S 8 - 5
Retrieving Memory Status List
You can retrieve the Memory Status List from a remote fax machine to see if
you have any fax messages.
1
Dial your fax number.
2
When you hear the beep, immediately enter your Remote Retrieval Access Code
(
1 5 9 ).
3
When you hear two short beeps, use the dial pad to press 9 6 1 .
4
Using the dial pad, enter the number of the remote fax machine where you want
the Memory Status List forwarded (up to 20 digits), and then press
# # .
5
After you hear your MFC beep, hang up and wait.
Your MFC calls the remote fax machine. The remote fax machine prints the
Memory Status List.
Retrieving Fax Messages
1
Dial your fax number.
2
When you hear the beep, immediately enter your Remote Retrieval Access Code
(
1 5 9 ).
3
As soon as you hear two short beeps, use the dial pad to press 9 6 2 .
4
Using the dial pad, enter the number of the remote fax machine where you want
your fax messages forwarded (up to 20 digits), and then press
# # .
5
After you hear your MFC beep, hang up and wait.
Your MFC calls the remote fax machine. The remote fax machine prints your
fax messages.
Note
You cannot use and # as dial numbers. However, if you want to store a
pause, press # .
Note
You cannot use and # as dial numbers. However, if you want to store a
pause, press # .