Brother MFC 4300 - Manual (Page 57)

S E T U P R E C E I V E 5 - 10
Registering Your Distinctive Ring Pattern
If you are not sure which ring pattern you have call your telephone company.
Then assign your ring pattern in the steps below.
1
Set the MFC to MANUAL mode.
2
Press Function , 1 , 0 , 1 . The LCD shows the current setting of this feature.
3
Press or to select DISTINCTIVE: SET? and press Set .
4
Press or to select the prestored ring pattern you want to assign, and then
press Set . (You will hear each pattern as you scroll through the four patterns.)
Be sure to choose the pattern assigned by the Telephone Company.
5
Press Stop to exit.
Once you’ve registered the Distinctive Ring pattern in your MFC, you can turn
this feature on or off. To change the setting, follow Steps 1 to 4 above, selecting
ON (or OFF).
Ring
Pattern
1
2
3
4
Rings
long - long
short - long - short
short - short - long
very long (normal pattern)