Brother MFC 4300 - Manual (Page 73)

A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S 7 - 4
Dialing and Telephone Options
You can use your MFC to make telephone and FAX calls by dialing manually,
or by using Search, One Touch or Speed Dial memory.
When you dial an auto dial number, the LCD shows the name you’ve stored. If
you haven’t stored a name, the fax number you’ve stored.
Manual Dialing
Manual dialing is simply pressing all of the digits of the phone number.
1
Pick up the handset—OR—Press Hook .
2
When you hear a dial tone, dial the call using the dial pad.
3
If you pressed Hook to dial the call, pick up the handset when the other party
answers. (The speaker works only one way; the other party won’t be able to hear
you unless you pick up the handset.)
4
To hang up, replace the handset.
One Touch Dialing
1
Pick up the handset—OR—Press Hook .
2
When you hear a dial tone, press the One Touch key of the location you want to
call. (See
Storing One Touch Dial Numbers , page 7-1.)
3
If you pressed Hook to dial the call, pick up the handset when the other party
answers. (The speaker works only one way; the other party won’t be able to hear
you unless you pickup the handset.)
4
To hang up, replace the handset.
If you are sending a fax, press Start after pressing the One Touch key. If you
picked up the handset, press Start when receiving the fax machine answers with
fax tones.
If you try to use a One Touch location with no number stored in it, you will hear
a warning sound, and the LCD will display NOT REGISTERED. The LCD
returns to normal after 2 seconds.