Brother MFC 4300 - Manual (Page 49)

S E T U P R E C E I V E 5 - 2
To select or change your Receive Mode
1
Press Receive Mode . The LCD shows your current selection.
2
Continue to press Receive Mode until your new selection appears. After 2
seconds, the LCD returns to the date and time display, along with your new
Receive Mode setting.
Setting Ring Delay
The Ring Delay setting determines the number of times the MFC rings
before it answers. If you have extension phones on the same line as the
MFC, keep the Ring Delay default setting of 4. (See
Easy Receive , page 5-3,
Operation from Extension Telephone or External Telephone , page 5-6 and For FAX/
TEL Mode Only , page 5-6.)
1
Press Function , 1 , 2 , 1 .
2
Press or to select how many times the line rings before the MFC answers
(00 – 04), and then press Set . If you select 00, the line doesn’t ring at all.
3
Press Stop to exit.
If you are changing Receive Mode while in another operation, the LCD returns
to the current operation display.
FAX/TEL
FAX ONLY
TAD:ANSWER MACH.
MANUAL
09/06 15:25 FAX
Current Receive Mode