Advanced receiving operations, For fax/tel mode only, Changing remote codes – Brother MFC 4300 User Manual
Page 53: Advanced receiving operations -6, Operation from extension telephone or, External telephone -6 for fax/tel mode only -6, Changing remote codes -6, For fax, Tel mode only
S E T U P R E C E I V E
5 - 6
Advanced Receiving Operations
Operation from Extension Telephone or External
Telephone
If you answer a fax call on an extension phone or on an external phone in the
EXT. jack, you can make your MFC take over by using the Fax Receive Code.
When you press the Fax Receive Code
5
1
, the MFC starts to receive a fax.
Setting FAX/TEL (F/T) Ring Time
If the MFC answers a voice call and double-rings for you to take over, use the
Telephone Answer Code
# 5 1
to take the call at an extension phone.
If you answer a call, and no one is on the line, assume you’re receiving a fax. At
the MFC phone, press
Start
, and then hang up. At an extension phone,
press
5
1
, wait for fax receiving tones (chirps), then hang up. At an external
phone, press
5
1
and wait for the phone to be disconnected (the LCD shows
RECEIVE) before you hang up. (Your caller will have to press
Start
to send
the fax.)
For FAX/TEL Mode Only
When the MFC is in FAX/TEL mode, it will use the F/T Ring Time (double-
ringing) to alert you to pick up a voice call. If you’re at the MFC, you can lift
the handset to answer.
If you’re at an extension phone, you’ll need to lift the handset during the F/T
Ring Time, and then press
# 5 1
between the double rings. If no one is on the
line, or if someone wants to send you a fax, send the call back to the MFC by
pressing
5
1
.
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset Fax
Receive Code is
5
1
. The preset Telephone Answer Code is
# 5 1
.
1
Press
Function
,
1
,
2
,
4
.
2
Press
or
to select ON (or OFF), and then
press
Set
.
3
If you want to, enter a new Fax Receive Code,
and then press
Set
.
4
If you want to, enter a new Telephone Answer
Code, and then press
Set
.
5
Press
Stop
to exit.
Note
If you are always disconnected when accessing your external TAD remotely,
try changing the Fax Receive Code from
5
1
to
#
#
#
and the Telephone
Answer Code from
# 5 1
to
9 9 9
.
REMOTE ACT.:ON?
FAX RECEIVE:
*
51
TEL ANSWER:#51