Brother MFC 4300 - Manual (Page 111)

F O R D O S U S E R S 12 - 4
Remote Printer Console
Current Printer Status Information
*1 The items can be set in the current printer status information dialog box.
*2 The information above is displayed if the bi-directional communication is
active between the computer and MFC.
Printer Setup Category
Print Setup Section
Item Default What This Item Does
Media Type Regular Selects the media type “Regular” or “Thick
Paper.”
Emulation*1 Laser Jet IIP “Laser Jet IIP.”
Paper Size*1 Letter Selects the paper size, either “Letter”,
“Legal”, “A4”, “B5”, “DL”, “Executive’’,
“COM10”, “Monarch” or “C5.”
Orientation*1 Portrait Selects the paper direction, either “Portrait”
or “Landscape.”
Quality*1 Normal Selects the print quality, either “Normal” or
“Economy.”
Copies*1 1 Sets the number of print copies from 1 to 200
pages.
Memory size*2 RPC retrieves and displays the printer
memory size.
Item Default What This Item Does
Copies 1 Sets the number of print copies from 1 to 200
pages.
Quality Normal Selects the print quality to either “Normal”
and “Economy.”
Auto FF Off If set to ON, the printer will print the
remaining data automatically without your
pressing the FF/Cont key.
Auto FF
Timeout 5 sec Sets the time-out value for the Auto FF mode
from 1 to 99 seconds.