Brother MFC 4300 - Manual (Page 119)

U S I N G T H E B R O T H E R M F C A S A P R I N T E R 13 - 5
Printing the Internal Font List
You can print a list of the MFC internal (or resident) fonts to see how each font
looks before you select it.
1
Press Function , 2 , 1 , 1 .
2
Press Start . The MFC prints the list.
3
Press Stop to exit.
Printing the Print Configuration List
You can print a list of current printer settings.
1
Press Function , 2 , 1 , 2 .
2
Press Start . The MFC prints the settings.
3
Press Stop to exit.
Restoring Factory Default Settings
You can return the MFC to original factory settings. Permanent fonts are
restored, but macros are cleared. You can change user settings using the Remote
Printer Console Program. (See page 13-1.)
1
Press Function , 2 , 2 , 1 .
2
Press 1 to restore the factory settings
—OR—Press 2 to exit without making a
change.
3
Press Stop to exit.
Printing PC Data in Hexadecimal
You can print data as hexadecimal values to check data errors and problems. If
you select HEX DUMP MODE, all PC data is printed hexadecimal. To turn
hexidecimal mode off, press
Job Cancel .
1
Press Function , 2 , 2 , 2 .
2
Press 1 to set PC to hexidecimal mode
—OR—Press 2 to exit without making a
change.
3
Press Stop to exit.
1.RESET 2.EXIT
1.SET 2.EXIT