Brocade 6910 Ethernet Access Switch Diagnostic Guide (Supporting R2.2.0.0) - Manual (Page 84)

74 Brocade 6910 Ethernet Access Switch Diagnostic Guide
53-1002653-01
8
DRAFT: BROCADE CONFIDENTIAL
Trunking
Flow Control Type : None
Member Ports : Eth1/11, Eth1/12
show lacp counters
Syntax: show lacp channel-id counters
This command displays information about the LACP packets sent and received by this trunk.
Command output resembles the following example.
Console# show lacp 1 counters
Port Channel : 1
------------------------------------------------------------------------------
Eth 1/11
------------------------------------------------------------------------------
LACPDUs Sent : 36
LACPDUs Received : 30
Marker Sent : 0
Marker Received : 0
LACPDUs Unknown Pkts : 0
LACPDUs Illegal Pkts : 0
. . .
show lacp internal
Syntax: show lacp channel-id internal
This command displays information about the configuration settings and the operational state for
the local side of this trunk.
Command output resembles the following example.
Console# show lacp 1 internal
Port Channel : 1
------------------------------------------------------------------------------
Oper Key : 3
Admin Key : 0
Eth 1/11
------------------------------------------------------------------------------
LACPDUs Internal : 30 seconds
LACP System Priority : 32768
LACP Port Priority : 32768
Admin Key : 3
Oper Key : 3
Admin State : defaulted, aggregation, long timeout, LACP-activity
Oper State : distributing, collecting, synchronization, aggregation,
long timeout, LACP-activity
. . .
show lacp neighbors
Syntax: show lacp channel-id neighbors
This command displays information about the configuration settings and the operational state for
the remote side of this trunk.
Command output resembles the following example.
Console# show lacp 1 neighbors