Brocade 6910 Ethernet Access Switch Diagnostic Guide (Supporting R2.2.0.0) - Manual (Page 7)

Brocade 6910 Ethernet Access Switch Diagnostic Guide vii
53-1002653-01
About This Document
In this chapter
This manual describes troubleshooting and diagnostic commands available in the command line
interface (CLI) for the Brocade Ethernet Access Switch.
• Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
• Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
• How to use this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
• Supported hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
• Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
• Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
• Getting technical help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
• Document feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
NOTE
Some troubleshooting commands report information about internal hardware settings and registers
that is relevant primarily to the Brocade engineering staff. Consequently, this information is not
described in this document.
Audience
This document is designed for system administrators with a working knowledge of Layer 2 and
Layer 3 switching and routing.
Disclaimer
This manual is provided without any warranty of any kind, expressed or implied. When using this
manual to troubleshoot Brocade products, you assume all risk as to the quality and performance of
the diagnostic procedures. Brocade assumes no liability for any damages, including general,
special, incidental, or consequential damages arising from the use of the diagnostic procedures in
this manual (including, but not limited to, any loss of profit or savings, loss of data, or failure to
successfully troubleshoot network problems).
Diagnostic information may be changed or updated without notice. You are responsible for
obtaining newer versions of this manual when they are made available. The procedures in this
document are not intended as a substitute for the expertise of qualified technicians.