Brocade 6910 Ethernet Access Switch Diagnostic Guide (Supporting R2.2.0.0) - Manual (Page 51)

Brocade 6910 Ethernet Access Switch Diagnostic Guide 41
53-1002653-01
4
DRAFT: BROCADE CONFIDENTIAL
Operation, Administration and Maintenance
brief - Displays a brief list of OAM configuration states.
This example displays a full list of OAM configuration settings and event counters.
Console# show efm oam status interface 1/1
OAM information of Eth 1/1:
Basic Information:
Admin State : Enabled
Operation State : Operational
Mode : Active
Remote Loopback : Disabled
Remote Loopback Status : No loopback
Dying Gasp : Enabled
Critical Event : Enabled
Link Monitor (Errored Frame) : Enabled
Link Monitor:
Errored Frame Window (100msec) : 10
Errored Frame Threshold : 1
This example displays a summary of OAM configuration settings and event counters.
Console#s how efm oam status interface 1/1 brief
$ = local OAM in loopback
* = remote OAM in loopback
Port Admin Mode Remote Dying Critical Errored
State Loopback Gasp Event Frame
---- ------- ------- -------- ------- -------- -------
1/1 Enabled Active Disabled Enabled Enabled Enabled
This command displays information about attached OAM-enabled devices.
show efm oam status remote interface
Syntax: show efm oam status remote interface [interface-list]
interface-list - unit/port
unit - Unit identifier. (Range: 1)
port - Port number or list of ports. To enter a list, separate nonconsecutive port identifiers
with a comma and no spaces; use a hyphen to designate a range of ports. (Range: 1-12)
This example displays information about attached OAM-enabled devices.
Console#show efm oam status remote interface 1/1
Port MAC Address OUI Remote Unidirectional Link MIB Variable
Loopback Monitor Retrieval
---- ----------------- ------ -------- -------------- ------- ------------
1/1 00-12-CF-6A-07-F6 000084 Enabled Disabled Enabled Disabled