Brocade 6910 Ethernet Access Switch Diagnostic Guide (Supporting R2.2.0.0) - Manual (Page 62)

52 Brocade 6910 Ethernet Access Switch Diagnostic Guide
53-1002653-01
6
DRAFT: BROCADE CONFIDENTIAL
IGMP snooping and MVR
Last Member Query Count : 2
General Query Suppression : Disabled
Query Interval : 125
Query Response Interval : 100 (unit: 1/10s)
Proxy Query Address : 0.0.0.0
Proxy Reporting : Using global status (Disabled)
Multicast Router Discovery : Disabled
VLAN Static Group Port
---- --------------- --------
1 224.1.1.1 Eth 1/ 1
.
.
.
show ip igmp snooping group
Syntax: show ip igmp snooping group [host-ip-addr ip-address interface | igmpsnp | sort-by-port |
user | vlan vlan-id [user | igmpsnp]]
• ip-address - IP address for multicast group
• interface
• ethernet unit/port
• unit - Unit identifier. (Range: 1)
• port - Port number. (Range: 1-12)
• port-channel channel-id (Range: 1-12)
• igmpsnp - Display only entries learned through IGMP snooping.
• sort-by-port - Display entries sorted by port.
• user - Display only the user-configured multicast entries.
• vlan-id - VLAN ID (1-4093)
This command shows known multicast group, source, and host port mappings.
Console#show ip igmp snooping group vlan 1
Flag: R - Router port, M - Group member port
H - Host counts (number of hosts join the group on this port).
P - Port counts (number of ports join the group).
Up time: Group elapsed time (d:h:m:s).
Expire : Group remaining time (m:s).
VLAN Group Port Up time Expire Count
---- --------------- ----------- ----------- ------ --------
1 224.1.1.1 00:00:00:47 1(P)
Eth 1/ 2(M) 0(H)
Eth 1/ 3(M) 0(H)
...
show ip igmp snooping mrouter
Syntax: show ip igmp snooping mrouter [dynamic | static | vlan vlan-id]
• dynamic - Displays dynamically learned multicast router ports.
• static - Displays statically configured multicast router ports.
• vlan-id - VLAN ID (Range: 1-4093)