Brocade 6910 Ethernet Access Switch Diagnostic Guide (Supporting R2.2.0.0) - Manual (Page 82)

72 Brocade 6910 Ethernet Access Switch Diagnostic Guide
53-1002653-01
7
DRAFT: BROCADE CONFIDENTIAL
SNTP
Configuration notes
• You can use the authentication login command to select a sequence of authentication
methods for each type of access to a device (CLI through Telnet, CLI Normal Exec and CLI
Privileged Exec levels). Use the authentication enable command to specify the sequence of
authentication methods to use when changing from Normal Exec command mode to Privileged
Exec command mode with the enable command.
SNTP
The Simple Network Time Protocol (SNTP) server enables the device to synchronize its clock with
an upstream time server. The SNTP server also allows the Brocade device to function as an SNTP
server to its downstream clients.
SNTP show commands
show sntp
Syntax: show sntp
This command displays information about the SNTP server.
Console# show sntp
Current Time : Nov 5 18:51:22 2006
Poll Interval : 16 seconds
Current Mode : Unicast
SNTP Status : Enabled
SNTP Server : 137.92.140.80 0.0.0.0 0.0.0.0
Current Server : 137.92.140.80