Brocade 6910 Ethernet Access Switch Diagnostic Guide (Supporting R2.2.0.0) - Manual (Page 83)

Brocade 6910 Ethernet Access Switch Diagnostic Guide 73
53-1002653-01
DRAFT: BROCADE CONFIDENTIAL
Chapter
8
Forwarding Diagnostics
In this chapter
This chapter describes diagnostics for forwarding protocols and environments on Brocade BR6910
series switches.
• Trunking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Trunking
Trunk groups are manually-configured aggregate links containing multiple ports. Trunk groups
enable load sharing of traffic, and they also provide redundant, alternate paths for traffic if any of
the segments fail.
Trunking show commands
Trunk group configuration information can be displayed.
show interfaces status port-channel
Syntax: show interfaces status port-channel channel-id
This command displays information about the interface settings and the operation status of a
trunk.
Console# show interfaces status port-channel 1
Information of Trunk 1
Basic Information:
Port Type : 1000T
MAC Address : 70-72-CF-32-DE-09
Configuration:
Name :
Port Admin : Up
Speed-duplex : Auto
Capabilities : 10half, 10full, 100half, 100full, 1000full
Broadcast Storm : Enabled
Broadcast Storm Limit : 64 Kbits/second
Flow Control : Disabled
VLAN Trunking : Disabled
Port Security : Disabled
Max MAC Count : 0
Port Security Action : None
Current Status:
Created By : LACP
Link Status : Up
Port Operation Status : Up
Operation Speed-duplex : 100full
Up Time : 0w 0d 0h 2m 37s (157 seconds)