Cpu memory show command, Power supplies, Power supply show commands – Brocade 6910 Ethernet Access Switch Diagnostic Guide (Supporting R2.2.0.0) User Manual
Page 19

Brocade 6910 Ethernet Access Switch Diagnostic Guide
9
53-1002653-01
2
DRAFT: BROCADE CONFIDENTIAL
Power supplies
Falling Threshold : 70%
CPU memory show command
The CPU uses memory buffers to handle interprocess communication (IPC) and external packets
sent and received by the management processor.
show memory
Syntax: show memory
The show memory command shows the amount of memory currently free for use, the amount of
memory allocated to active processes, and the total amount of system memory, and the configured
thresholds used for sending an SNMP trap message, as shown in the following example.
Console# show memory
Status Bytes %
------ ---------- ---
Free 34775040 25
Used 99442688 75
Total 134217728
Alarm Configuration
Rising Threshold : 90%
Falling Threshold : 70%
Power supplies
Information about power supplies can be displayed.
Power supply show commands
show system
Syntax: show system
You can view power supply information using the show system command. Command output
resembles the following example. (The temperatures shown by this command are in Celsius.)
Console# show system
System Description : BR6910
System OID String : 1.3.6.1.4.1.1991.1.16.1
System Information
System Up Time : 0 days, 4 hours, 37 minutes, and 26.11 seconds
System Name :
System Location :
System Contact :
MAC Address (Unit 1) : 70-72-CF-32-DD-FD
Web Server : Enabled
Web Server Port : 80
Web Secure Server : Enabled
Web Secure Server Port : 443
Telnet Server : Enabled
Telnet Server Port : 23
Jumbo Frame : Disabled