Configuration notes, Draft: brocade confidential – Brocade 6910 Ethernet Access Switch Diagnostic Guide (Supporting R2.2.0.0) User Manual
Page 80

70
Brocade 6910 Ethernet Access Switch Diagnostic Guide
53-1002653-01
7
DRAFT: BROCADE CONFIDENTIAL
TACACS and TACACS+
This command displays information about all TACACS+ servers configured on the device.
Console# show tacacs-server
Remote TACACS+ Server Configuration:
Global Settings:
Server Port Number : 49
Retransmit Times : 2
Timeout : 5
Server 1:
Server IP Address : 10.11.12.13
Server Port Number : 49
Retransmit Times : 2
Timeout : 4
Tacacs Server Group:
Group Name Member Index
------------------------- -------------
tacacs+ 1
show users
Syntax: show users
This command displays the privilege level of users of all management interfaces.
Console# show users
User Name Accounts:
User Name Privilege Public-Key
--------- --------- ----------
admin 15 None
guest 0 None
steve 15 RSA
Online Users:
Line Username Idle time (h:m:s) Remote IP addr.
----------- -------- ----------------- ---------------
0 console admin 0:14:14
* 1 VTY 0 admin 0:00:00 192.168.1.19
2 SSH 1 steve 0:00:06 192.168.1.19
Web Online Users:
Line Remote IP Addr User Name Idle time (h:m:s)
----------- --------------- --------- ------------------
1 HTTP 192.168.1.19 admin 0:00:00
Configuration notes
•
You must deploy at least one TACACS or TACACS+ server in your network to provide
authentication services.
•
The Brocade device supports authentication using one TACACS or TACACS+ server.