Draft: brocade confidential – Brocade 6910 Ethernet Access Switch Diagnostic Guide (Supporting R2.2.0.0) User Manual
Page 68

58
Brocade 6910 Ethernet Access Switch Diagnostic Guide
53-1002653-01
6
DRAFT: BROCADE CONFIDENTIAL
IGMP snooping and MVR
Fields descriptions:
qry : Query will be sent after this time.
o_qry : Other querier presents and will expire after this time.
dy_rt : The port interface is a dynamical router port during this time.
v1_qry: IGMPv1 querier presents and will expire after this time.
v2_qry: IGMPv2 querier presents and will expire after this time.
report: IGMP proxy report will be sent after this time.
xstp : Topology is changed and multicast will be flood during this time.
mrd : MRD solicitation will be sent after this time.
name vid qry o_qry dy_rt v1_qry v2_qry report xstp mrd
---- ----- ----- ----- ----- ------ ------ ------ ---- ---
1 1 0 0 0 0 0 0 0 0
2 1 0 0 0 0 0 0 0 0
3 1 0 0 0 0 0 0 0 0
4 1 0 0 0 0 0 0 0 0
5 1 0 0 0 0 0 0 0 0
6 1 0 0 0 0 0 0 0 0
7 1 0 0 0 0 0 0 0 0
8 1 0 0 0 0 0 0 0 0
9 1 0 0 0 0 0 0 0 0
10 1 0 0 0 0 0 0 0 0
11 1 0 0 0 0 0 0 0 0
12 1 0 0 0 0 0 0 0 0
1001 1 0 0 0 0 0 0 0 0
1001 10001 0 0 0 0 0 0 0 0
debug msl show-interface-info
Syntax: debug msl show-interface-info
This command shows the status of all Multicast Shim Layer (MSL) VLAN interfaces.
Console#debug msl show-interface-info
interface vid:1, bridge id:0, vrf id:0, Flags : SNP_ACTIVE,
all member port : 1, 2, 3, 4, 6, 7, 8, 9, 10, 11, 12,
router port list:
interface vid:5, bridge id:0, vrf id:0, Flags : SNP_ACTIVE,
all member port : 5,
router port list:
debug msl show-mrt-info
Syntax: debug msl show-mrt-info
This command shows the status of all Multicast Routing (MRT) interfaces.
Console#debug msl show-mrt-info
Group: 225.1.1.1, Source: 0.0.0.0, Upstream VLAN: 0, rp: 0
Flags: , SNP, , , , Hit Bit: 0
Snooping interface:
L2 interface: 1(Flags : CHIP,,,) port:1,
L2 interface: 5(Flags : CHIP,,,) port:5,
Multicast downstream interface: