Chain stitch option, Chain stitch the binding to the quilted fabric, Attaching binding – Bernina dcet 2500 User Manual
Page 88: Instruction manual pg._____ feet-ures unit____pg
1999 BERNINA Of America
Section E - page 13
ATTACHING BINDING
Instruction Manual pg._____
Feet-ures Unit____pg.________
Cover Stitch Option
•
Convert the serger from Overlock to Cover Stitch. Insert the Left and Right Needles
and turn the Stitch Selection Dial to “F”. Set Stitch Length at 3.
•
Thread the serger for a wide 3-Thread Cover Stitch.
•
Wrap the bias binding around one 6” side of the quilted fabric using 505
Adhesive
Spray to hold the binding in place.
•
Place the fabric under the Needles with the unstitched edge of the binding even with
the inside of the Left Floating Toe. The quilted fabric will lay to the left.
•
Cover Stitch the binding to the quilted fabric.
Chain Stitch Option
•
Thread the serger for a Chain Stitch using the Right Needle. Set the Stitch Selection
Dial to “G”. Set Stitch Length at 3.
•
Wrap the bias binding around the other 6” side of the quilted fabric using 505
Adhesive Spray to hold the binding in place.
•
Place the fabric under the Needle with the unstitched edge of the binding even with the
inside of the Right Floating Toe. The quilted fabric will lay to the right.
•
Chain Stitch the binding to the quilted fabric.
•
Trim and mount the sample.
FABRIC:
Prequilted fabric 3” X 6”
20” of wide pre-folded bias binding
NEEDLES:
80/12
universal
THREAD:
2 or 3 cones of serger thread
PRESSER FOOT: Cover Stitch