Bernina dcet 2500 - Manual (Page 63)


1999 BERNINA Of America
Section D - page 3
3-THREAD SUPER STRETCH STITCH
Instruction Manual pg.___
Bernette
 Advanced Guide Workbook Supplement I pg.___
Serger Library – Tips and Tricks
• Attach the Upper Looper Converter – Instruction Manual pg.___.
• Turn the Stitch Selection Dial to “B” to automatically adjust thread tension.
• Following the instructions on page ___ of your Instruction Manual, thread
the serger for a Super Stretch Stitch using the Left and Center Needles. Use
Woolly Nylon in the Lower Looper.
• Adjust Stitch Length at 2.5 (normal).
• Fold the Lycra in half to 2½” X 6”.
• Place the fabric under the Presser Foot and serge, cutting off the fold.
• Trim and mount the sample.
FABRIC: Cotton or nylon Lycra 5” X 6”
NEEDLES: 80/12 stretch or 11/75 ballpoint
THREAD: 2 cones of serger thread (Needles)
1 cone of Woolly Nylon (Lower Looper)
PRESSER FOOT: Standard